WELCOME to Idaho Lewis’s Muzzleloading Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

thread size

2 posters

Go down

thread size Empty thread size

Post by Bronko22000 19/04/22, 05:56 pm

Does anyone know what the thread diameter and pitch size is for the Lyman and Williams peep sights.
I believe because of my vision issue I may have to use one of their apertures at around .093" for my vernier tang sight. I will also have to make a metal plate to install and hold it in place in the sight frame.
Bronko22000
Bronko22000

Posts : 372
Join date : 2022-01-20
Age : 69
Location : Locust Gap, PA

TD BRIGHT likes this post

Back to top Go down

thread size Empty Re: thread size

Post by TD BRIGHT 20/04/22, 05:04 pm

Hi Bronko22000
I just had a problem with a tang sight i got on e-bay for my TC Hawken I had to make a nut for the Lyman disk the thread size is 7/32-40 an odd ball you can order the tap from www.victornet.com they are about $15. the cheapest i've founded or buy the disk and nut for a TC at aperturenmore.com for $20 bucks. good luck.

TD BRIGHT

Posts : 9
Join date : 2021-12-23
Location : south carolina

Bronko22000 likes this post

Back to top Go down

thread size Empty Re: thread size

Post by Bronko22000 20/04/22, 05:21 pm

TD BRIGHT wrote:Hi Bronko22000
I just had a problem with a tang sight i got on e-bay for my TC Hawken I had to make a nut for the Lyman disk the thread size is 7/32-40 an odd ball you can order the tap from www.victornet.com they are about $15. the cheapest i've founded or buy the disk and nut for a TC at aperturenmore.com for $20 bucks. good luck.

Thanks TD.
Bronko22000
Bronko22000

Posts : 372
Join date : 2022-01-20
Age : 69
Location : Locust Gap, PA

Back to top Go down

thread size Empty Re: thread size

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum