WELCOME to High Plains Muzzle Loading Forum!
Would you like to react to this message? Create an account in a few clicks or log in to continue.
WELCOME to High Plains Muzzle Loading Forum!

Muzzleloaders, Blackpowder, Bullet Casting


Marty's molds

2 posters

WELCOME to High Plains Muzzle Loading Forum! :: Muzzleloading, Firearms & Optics :: Bullet Casting

Go down

Marty's molds Empty Marty's molds

Post by Muzzleloader hunter 18/05/22, 04:15 pm

Has anyone used one of Marty's round ball molds if so how did it work or any other recommendations on a good .600 round ball mold.

Muzzleloader hunter

Posts : 17
Join date : 2022-03-19

squattingdog likes this post

Back to top Go down

Marty's molds Empty Re: Marty's molds

Post by Bert621 16/10/22, 09:25 pm

I used two different sizes for buckshot. A .300 and a .310, they're round enough to work right. But cutting the sprue with nippers was alot of extra work. Can you find a Lee mold that size?

Bert621

Posts : 3
Join date : 2022-09-24

Back to top Go down

Back to top

WELCOME to High Plains Muzzle Loading Forum! :: Muzzleloading, Firearms & Optics :: Bullet Casting

 
Permissions in this forum:
You cannot reply to topics in this forum