WELCOME to High Plains Muzzle Loading Forum!
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Bullet/Bore Sizing

3 posters

Go down

Bullet/Bore Sizing  Empty Bullet/Bore Sizing

Post by SJHANSEN94 28/07/22, 07:05 am

Hi fellas, needing to pick some brains on selecting a mold and the bore sizing for my T/C renegade, I mostly shoot round ball so bullet to bore with a pure lead bullet is new to me. my bore mics out at .502.5 for lands and .512-.513 for groves. I've sized bullet to bore for inlines with jacketed bullets but never pure lead. Hopefully you guys can steer me in the right direction here.

SJHANSEN94

Posts : 1
Join date : 2022-07-24

TD BRIGHT likes this post

Back to top Go down

Bullet/Bore Sizing  Empty Re: Bullet/Bore Sizing

Post by Gunpa 01/08/22, 09:39 am

I'd just get a 490 mold and use different patch combinations till you get where you wanna be.

Gunpa

Posts : 8
Join date : 2022-04-08

Jitterbug and squattingdog like this post

Back to top Go down

Bullet/Bore Sizing  Empty Re: Bullet/Bore Sizing

Post by Muzzlestuffer 11/08/22, 04:06 pm

Depend on what you doing with it I'm assuming hunting where you might need a follow up shot if you can I'd probably go 1-2 thou under should be good for accuracy and easy loading with a fouled bore so start with the .501 and if it's to tight you can size it down a tad more

Muzzlestuffer

Posts : 73
Join date : 2021-11-30
Location : Arizona

Back to top Go down

Bullet/Bore Sizing  Empty Re: Bullet/Bore Sizing

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum